• PACK OF 40 SOLID FUEL TABLETS FOR USE WITH MAMOD OR WILESCO ENGINES

    CAN ALSO BE USED AS FIRELIGHTERS FOR CAMPING STOVES OR BARBEQUES.
    £10.00
    Brand: Mamod
    £5.11 postage
    Customs services and international tracking provided
  • Perfect Plumb Professional Plumbing Blow Torch Soldering Mapp Propane Gas

    Perfect Plumb Soldering Torch. Instant Long-Lift Piezo Igniter. Solid Die Cast Torch Body. Gas Regulator Button. Fast, Concentrated, High Heat. Professional Quality.
    £34.99
    Customs services and international tracking provided
    £5.48 postage
    1,432 sold
  • 1 x Pop Pop Boat Toy Steam Boat

    The Tin Steam Boat. Place a Tea light candle in the boat and the boat will move round untill the candle burns out. The Worlds Smallest Steam Boats. Full instructions and kit to get your boat up and running included.
    £5.99
    Customs services and international tracking provided
    £5.06 postage
  • New listingCotswold Heritage Twin Cylinder Model Steam Engine, Boiler, Gas Tank & Pump

    Cotswold Heritage gryphon twin cylinder model steam engine. http://www.modelsteamenginesuk.com/acatalog/Gryphon_Machined_Kit_Model_Steam_Engine.html Cotswold 7VRFP vertical boiler with surefill gas tank and hand pump to replenish water whilst in steam. http://www.modelsteamenginesuk.com/acatalog/Gas-Fired_Boilers.html All mounted on solid wooden base. Paperwork and certificates (photo to follow).
    £300.00
    0 bids
    £24.11 postage
    Ending 17 Dec at 12:15PM GMT6d 7h
    or Best Offer
    Customs services and international tracking provided
  • 5" Gauge Railway buffer

    5" Gauge buffer 15inches of track with 3 sleepers 10 inches wide. The buffer stands 8 inches high ( including lamp ) . The beam is tannalised batton ( 38mm x 25mm ). Perfect treat for Christmas.
    £44.85
    0 bids
    £10.75 postage
    Ending Sunday at 8:28PM GMT5d 15h
    or Best Offer
    Brand: UnbrandedCustoms services and international tracking provided
  • silver solder Johnson Matthey Silverflo 40 10 rods x 250mm 1.5mm flux FREEPOST!

    Grading of silver bearing brazing alloys is strictly regulated by EN1044 and other world standards, we only source from quality British or German manufacturers (Johnson Matthey, Brazetec, Eutectic or Thessco).
    £18.75
    £9.90 postage
    1,123 sold
  • New listingHornby G-100 Stephenson's Rocket 3 1/2 inch Gauge Real Steam

    Original Gas Canister in good condition - no leaks when last fired.
    £70.00
    1 bid
    £12.92 postage
    Ending Saturday at 6:00PM GMT4d 12hBrand: HornbyAssembly: Pre-AssembledCustoms services and international tracking provided
  • Rare Vintage Maccsteam Ltd Quality Shed Built Style Brass & Copper Boiler

    Rare Vintage Quality Shed Built Brass & Copper Boiler. I’m not sure of its purpose or if it works or if it’s complete. Could even have been a shop display or salesman sample. Measures approximately 215mm tall and 90mm wide. Condition as per pics
    £122.00
    15 bids
    £29.99 postage
    Ending Today at 8:03PM GMT14h 54m
  • New listingMamod Steam Railway Locomotive Train SL1K Needs Full Restoration

    Be aware this is Gauge One, but of course the beauty of these locos are lots of parts and modifications are available including parts to revert this back to Gauge O.
    £63.00
    6 bids
    £18.50 postage
    Ending 17 Dec at 7:16PM GMT6d 14hBrand: MamodAssembly: Kit Built
  • Small BA Steel bolts. 10ba, 8ba and 12ba packs of 25

    £1.79 to £4.09
    Brand: Unbranded
    £3.50 postage
    112 sold
  • 3 1/2 inch gauge britannia

    3 1/2 gauge britannia which was started in the 70"s and been left untouched since the builder died in 1979. What is done is made to a good standard with nice fluting on the rods etc , the whole thing pushes along freely good start to a nice model. Drawings and castings are available from black gates engineering UK bidders only
    £51.00
    15 bids
    £17.78 postage
    Ending Wednesday at 8:31AM GMT1d 3hCustoms services and international tracking provided
  • New listingLIVE STEAM ENGINE EARLY 1900S poss ernist plank

    £99.99
    0 bids
    £13.10 postage
    Ending 17 Dec at 5:00PM GMT6d 11hBrand: Unbranded
  • New listingWilesco Showmans Live Steam Traction Engine Good Condition Burrell Mamod D409

    A vintage Wilesco live steam Showmans traction engine complete with the burner. Paintwork is all original. Sold as seen and untested. Please study the pictures as they form part of the description. See my other listings for more steam items.
    £169.99
    Brand: Wilesco
    £14.53 postage
    Assembly: Pre-Assembled
    or Best Offer
    Customs services and international tracking provided
    11 watching
  • MAMOD or WILESCO TYPE LIVING VAN KIT (To Build)

    Living Van Sizes approx Length 22cm x Width 11.5cm x Height 20cm (includes the wheels) Tow bar 9cm. ALL MY KITS ARE READY TO GLUE TOGETHER THERE IS NO CUTTING OUT TO BE DONE. Planking pattern to the outside ( shows through when painted).
    £35.99
    Assembly: Kit Unbuilt
    £5.50 postage
    Customs services and international tracking provided
    26 watching
  • Old Bowman Models Live Steam O Gauge LNER Model 300 RLY Locomotive & Accesories

    This great model dates back to the 1930’s and is offered for sale in exactly the condition you would expect from an expensive toy at the time which has been used and loved. Please check the photos carefully to confirm the exact condition of the item. Nothing is broken or missing and I expect it works perfectly. With a good clean, it would show much better but I’m not going to touch it because many will want it in exactly the condition it is in now. The instructions are missing as is the box lid but otherwise everything is there. Happy to answer any further questions by email. The item will be sent using a fully tracked service insured for its full value. Good luck if you decide to bid.
    £51.00
    6 bids
    £15.78 postage
    Ending Sunday at 7:15PM GMT5d 14hBrand: BowmanAssembly: Pre-AssembledCustoms services and international tracking provided
  • a huge 10Kg. rivited multitube brass steam engine boiler plus boiler pump

    Along with this boiler is the original boiler feed pump which has a 1/2" (1.25cm.). piston with a 1 1/4" (3.2cm.). The pipework is still there but not attached to the clack valve. This riveted brass boiler has been left exactly as found.
    £280.00
    1 bid
    £51.90 postage
    Ending Sunday at 7:50PM GMT5d 14hBrand: Unbranded
  • Steam engine cylinder castings

    Various castings including twin cylinder, top and bottom plates and various other pieces.
    £60.00
    0 bids
    £11.45 postage
    Ending Sunday at 7:53PM GMT5d 14h
    or Best Offer
    Brand: UnbrandedCustoms services and international tracking provided
  • VINTAGE SINGLE CYLINDER LIVE STEAM MARINE ENGINE

    LIVE STEAM.
    £51.01
    16 bids
    £10.78 postage
    Ending Sunday at 5:36PM GMT5d 12hCustoms services and international tracking provided
  • VINTAGE STUART TURNER LIVE STEAM 501 BOILER

    STUART TURNER 501 BOILER.
    £52.00
    6 bids
    £15.79 postage
    Ending Sunday at 5:37PM GMT5d 12hBrand: Stuart TurnerCustoms services and international tracking provided
  • New listingmamod roadster

    mamod steam roadster twin seats please see photos for accurate description
    £45.00
    Brand: Mamod
    £5.62 postage
    Customs services and international tracking provided
    or Best Offer
  • RARE LIVE STEAM 0 GAUGE G SCALE 0-4-0 TANK LOCO - UNKNOWN MAKER, ACCUCRAFT ETC

    Unusual unknown make live steam 0 gauge or G scale 0-4-0 loco. 0-4-0 TANK LOCO. LIVE STEAM.
    £51.00
    7 bids
    £15.78 postage
    Ending Sunday at 5:34PM GMT5d 12hCustoms services and international tracking provided
  • Steam engine

    Steam engine unknown make a few bits to finish. Amazing build.
    £490.00
    0 bids
    £35.66 postage
    Ending Sunday at 10:22PM GMT5d 17hCustoms services and international tracking provided
  • RARE LIVE STEAM 0 GAUGE G SCALE 0-4-0 TANK LOCO - UNKNOWN MAKER, ACCUCRAFT ETC

    Unusual unknown make live steam 0 gauge or G scale 0-4-0 loco. 0-4-0 TANK LOCO. LIVE STEAM.
    £245.00
    12 bids
    £18.38 postage
    Ending Sunday at 5:36PM GMT5d 12hCustoms services and international tracking provided
  • Retro Candle Powered Steam Boat Pop Pop Put Put Ship Collection Tin Toy Gift

    1 Pc Candle Boat. Fire the candle to start the engine and watch it go. Main material:Iron. Also note that monitor settings may vary from computer to computer and may distort actual colors. Color:As the picture shows.
    £3.29
    From China
    Free postage
    Brand: Unbranded
    78 sold
  • a Stuart Turner 10V steam engine in perfect running order ( pictured running )

    Stuart 10V Steam Engine. I am a retired model engineer (16 years now) with a passion for quality steam engines. This engine has been left exactly as I found it. It is dusty, dirty and oily but runs perfectly, as shown in my last two photographs.
    £132.00
    3 bids
    £16.95 postage
    Ending Sunday at 7:39PM GMT5d 14hBrand: Stuart Turner
  • MAMOD STEAM ROAD ROLLER

    MAMOD STEAM ROAD ROLLER , RESCUED FROM THE ATTIC ,NO METHS TRAY OR SCUTTLE, UNTESTED.
    £30.00
    2 bids
    £11.00 postage
    Ending Today at 7:11PM GMT14h 2mBrand: MamodCustoms services and international tracking provided
  • Clarkson Line Drawing A4 Pacific 3.1/2" Gauge

    Here is an old line Drawing by Clarkson. There is a second plan - not quite as readable - which is a 1947 line drawing of an A1 Pacific again in 3.1/2" gauge. This is shown in the last photo. It is "Full size" for 3.1/2" Gauge.
    £0.99
    1 bid
    £8.71 postage
    Ending Sunday at 9:59AM GMT5d 4hCustoms services and international tracking provided
  • Stuart Turner no 10 steam engine

    Stuart no 10 run so smoothly old build could do with a re paint.
    £109.00
    17 bids
    £14.56 postage
    Ending Sunday at 7:34PM GMT5d 14hBrand: Stuart TurnerCustoms services and international tracking provided
  • Model Steam Engine Parts - Job Lot

    Job Lot Steam engine parts.
    £18.50
    7 bids
    £11.34 postage
    Ending Sunday at 7:05PM GMT5d 13hCustoms services and international tracking provided
  • Stationary Model Steam Engine similar to Wilesco dated late 1950s

    No manufacture's details or instructions, but Wilesco later made one very similar. Great to fun to run!
    £35.00
    3 bids
    £10.61 postage
    Ending Thursday at 6:32PM GMT2d 13hBrand: UnbrandedCustoms services and international tracking provided
  • Bore micrometer

    8/2/1/4 plus mic. needs clean and oil up but working.
    £10.00
    0 bids
    £10.23 postage
    Ending Saturday at 12:20PM GMT4d 7hCustoms services and international tracking provided
  • Model Stationary Vertical Steam Engine-

    This is a very well engineered freelance model steam engine with slide valve. The flywheel is 17cm diameter and the engine stands at 31cm high including the varnished wooden base. The base is 20 cm x 17cm As you can see from the photos this is a very well built engine which has been finished off to a high standard and is a very smooth running engine. Runs very well on low air pressure.
    £52.00
    5 bids
    £20.79 postage
    Ending Sunday at 6:28PM GMT5d 13hBrand: UnbrandedAssembly: Scratch BuiltCustoms services and international tracking provided
  • New listingMAMOD PRESS STEAM ENGINE ACCESSORY. Steam press

    MAMOD PRESS STEAM ENGINE ACCESSORY. Steam press Condition is Used. Dispatched with Royal Mail 2nd Class. Good condition no rust. Nice little accessory to run off a mamod traction engine. No reserve
    £4.20
    0 bids
    £8.10 postage
    Ending 17 Dec at 12:01PM GMT6d 6h
    or Best Offer
    Brand: MamodCustoms services and international tracking provided
  • New listingmamod steam engine

    mamod steam engine been used not recently please see photos for accurate description
    £29.99
    0 bids
    £12.49 postage
    Ending 17 Dec at 9:00PM GMT6d 15hBrand: MamodCustoms services and international tracking provided
  • Model Steam Engine

    Model Steam engine - 270mm high. Make unknown. Condition as per photos.
    £42.00
    18 bids
    £8.56 postage
    Ending Thursday at 8:19PM GMT2d 15hBrand: UnbrandedAssembly: Pre-AssembledCustoms services and international tracking provided
  • THREE VINTAGE MAMOD LIVE STEAM ENGINES, 1 TRACTION AND 2 STATIONARY !!

    £42.08
    14 bids
    £15.66 postage
    Ending Sunday at 5:37PM GMT5d 12hBrand: MamodCustoms services and international tracking provided
  • LIVE STEAM STUART TURNER HORIZONTAL MILL ENGINE

    Live steam Stuart Turner horizontal mill engine in good condition and turning over freely. STUART TURNER MILL ENGINE.
    £142.00
    17 bids
    £17.00 postage
    Ending Sunday at 5:37PM GMT5d 12hBrand: Stuart TurnerCustoms services and international tracking provided
  • Stuart Turner no 9 castings

    Stuart no 9 castings new in box.
    £285.00
    0 bids
    £32.91 postage
    Ending Sunday at 9:05PM GMT5d 15hBrand: Stuart TurnerCustoms services and international tracking provided
  • 5''GAUGE PARTS FOR UNKNOWN LOCO. live steam?? 

    Radiator, fire grate wooden sides with brass gizmos and pipework, cab seat and water or fuel tank and a handheld oiler for said bits. 
    £40.00
    0 bids
    £18.08 postage
    Ending Today at 8:59PM GMT15h 50m
    or Best Offer
    Customs services and international tracking provided
  • Model Steam Engine Boiler.

    Steam Engine Boilers.
    £26.00
    5 bids
    £12.44 postage
    Ending Sunday at 7:10PM GMT5d 14hCustoms services and international tracking provided
  • Vintage Ceramic Mamod Steam Tractor Model, Studio Ceramic

    Height 17cm length 24cm.
    £12.00
    2 bids
    £11.18 postage
    Ending Wednesday at 8:04PM GMT1d 14hBrand: MamodAssembly: Pre-AssembledCustoms services and international tracking provided
  • New listingLIVE STEAM ACCESORIES MAMOD WILLESCO.

    £14.99
    1 bid
    £9.49 postage
    Ending Today at 6:13PM GMT13h 4mBrand: Mamod
  • New listingWILESCO D48 / GRAUPNER TWIN CYLINDER MARINE STEAM ENGINE - RARELY AVAILABLE

    For sale is this Graupner two cylinder marine steam engine. It is nearly identical to the Wilesco D48, the only difference is (apparently) the gears. As this is nearly identical to the D48, information about the kit is set out below.
    £72.00
    0 bids
    £11.61 postage
    Ending 17 Dec at 6:46PM GMT6d 13hBrand: WilescoCustoms services and international tracking provided
  • New listingmamod sa1 roadster

    £89.00
    0 bids
    £9.50 postage
    Ending 18 Dec at 4:40AM GMT6d 23hBrand: Mamod
  • The Layman's Guide To Mamod Steam Engines (B&W) Book

    Mamod steam engines are great pieces of engineering from the past that can range from up to nearly 80 years old. As well as this, this book is a complete guide to restoring, repairing and maintaining Mamod steam engines with separate chapters covering the SE/SP/MM range TE1/a, SR1/a, canopy roof and LW1 lumber wagon.
    £10.95
    Brand: Mamod
    £5.16 postage
    Customs services and international tracking provided
    38 watching
  • Mamod steam engine SE3 in very good con.

    Here we have a mamod team engine SE3 in quite good condition, only missing. part at end of boiler see all pictures not in original box.
    £18.00
    4 bids
    £12.84 postage
    Ending 19 Dec at 9:10PM GMT8d 16hBrand: MamodAssembly: Pre-AssembledCustoms services and international tracking provided
  • New listingSingle Cylinder Steam Engine, perfect Christmas gift for any engineer

    £1.20
    2 bids
    £9.10 postage
    Ending Thursday at 10:15AM GMT2d 5hBrand: UnbrandedAssembly: Scratch BuiltCustoms services and international tracking provided
  • STEPHENSON ROCKET STEAM ENGINE AND BUS

    £30.00
    Brand: Hornby
    £10.42 postage
    Customs services and international tracking provided

Steam Toys

Steam toys are usually much sought after by specialist collectors and are commonly available as engines and locomotives. There is also a wide range of accessories and parts available for the hobbyist builder here on www.bigflashcasino.com. Many steam toys can be purchased pre-assembled or with kit built or kit unbuilt and are available in new or second-hand condition.

Miniature Classics

Since the late 1800’s toy steam engines have captivated children and adults alike. Between 1890-1930 can be seen as the ‘golden age’ of live steam engine models, with a lot of production coming from Germany. At around 1900 production increased yet further and continued up until the end of the 30s.

Steam toys are manufactured by notable quality brands such as Hornby, Mamod and Wilesco. Railway enthusiasts will particularly appreciate scaled down replicas of celebrated locomotives such as the Flying Scotsman or Stephenson’s Rocket.

Build Your Own

For a lot of serious enthusiasts creating steam toys ‘from scratch’ can be a real labour of love and many engines and locomotives can also be purchased scratch built. This means that the scale model has already been built from scratch from raw materials, rather than a commercial kit or through buying it pre-assembled.

If you have a project planned and you intend to refurbish an existing model or wish to build your replica model from the ground up there is a wide range of spare parts available including bolts, tyres, boiler parts, vacuum pumps and safety valves.

Within the steam toy categories are various model types such as live steam locomotives, steamrollers, steam boilers and steam traction engines. Sturdy steamrollers are powered using solid fuel tablets and feature all the engineering you would expect including brass boiler, water gauge, safety valve, reversing lever and a pull-chain steam whistle for realistic sound.

Steam traction engines and live steam locomotives are also available as live steam train sets for indoor or outdoor use that come complete with track and make great starter sets for entry-level hobbyists.